通知公告

信息检索

通知公告

当前位置：首页 > 通知公告 > 通知公告

NOTICE AND INVITATION TO PARTICIPANT 10th International College Students Intelligent Agricultural Equipment Innovation Competition

发布日期：2024-11-12　　浏览次数：997次

To all Universities, Colleges, and Institutes:

International College Students Intelligent Agricultural Equipment Innovation Competition (Hereinafter referred to as the "competition") aims to cultivate students' innovative spirit and practical ability, stimulate innovation and entrepreneurship inspiration, and promote the cultivation of innovative and entrepreneurial talents in the field of agricultural equipment engineering and international exchange and cooperation for students majoring in agricultural engineering. The competition has become extremely influential in the field of agricultural equipment engineering, and has achieved remarkable results in cultivating students' innovation and entrepreneurship ability and comprehensive quality. According to the regulations, the 10^th competition will be held now. Now relevant matters are hereby notified as follows：

I. Purpose of the competition

With the theme of "Develop new quality productive forces of agricultural equipment, facilitate high-quality agricultural development", the competition aims to cultivate modern agricultural equipment innovation and entrepreneurship talents with "strong professional knowledge and hands-on ability, as well as excellent innovation and entrepreneurship ability" urgently needed by the industry, and creates a comprehensive international education platform, contributing to the innovative development of modern agricultural equipment industry.

II. Organization

The competition sets up leading organizations and working organizations. The leading organization consists of the Competition steering Committee and the Competition Committee (Annex 1), which has a secretariat (affiliated to Jiangsu University). The working organizations include the working group of the competition organizer and the competition evaluation expert group.

III. Organizers

The 10^th International College Students Intelligent Agricultural Equipment Innovation Competition is organized by the following collaborating institutions:

1. Co-hosts:

· International Commission of Agricultural and Biosystems Engineering (CIGR)

· Chinese Society of Agricultural Machinery (CSAM),

· Chinese Society of Agricultural Engineering (CSAE),

· Jiangsu Province and Education Ministry Co-sponsored Synergistic Innovation Center of Modern Agricultural Equipment (SIAE)

· International University Consortium for Agricultural Engineering (IUCAE).

2. Organizer:

Qingdao Agricultural University.

3. Co-organizer:

China Agricultural Machinery Distribution Association (CAMDA)

IV. Competition Requirements

1. Participant requirements and Limit number of works for each participant:

(1) Participant requirements

Participant must be formally registered before September 2024 (including September) in the full-time non-adult of higher education institutions and vocational colleges, including junior college students, undergraduates, full-time and part-time (full-time study) graduate students. Participant may apply in teams of two to five members. It is mainly for overseas students, and can be mixed with domestic students to form a team, requiring overseas students to be the leader and the number of overseas students is half or more of the team.

(2) Limit number of works

Class A and D works are limited to one entry for each participant.

2. Entry categories:

The works are divided into two classes: A and D.

Class A: Scientific or Technological Inventions in Intelligent Agricultural Equipment

· A1: Invention of intelligent tillage equipment,

· A2: Invention of intelligent planting equipment,

· A3: Invention of intelligent field management equipment,

· A4: Invention of intelligent water-saving irrigation equipment,

· A5: Invention of intelligent harvesting agricultural equipment,

· A6: Invention of intelligent farm products origin processing equipment;

· A7: Basic parts (hydraulic parts, transmission system, sensors, electric drive, navigation system, etc.)

· A8: Other intelligent agricultural equipment.

The author with the highest academic degree serves as the team leader, and the teams are divided into Undergraduate Group and Graduate (Master's and Doctoral) Group based on the leader's educational background.

Class D: Conceptual Design

The works refer to future-oriented intelligent agricultural machinery and intelligent agriculture, and have advanced awareness or subversive intelligent agricultural equipment creative design, or intelligent agricultural equipment machine modeling design.

Special statement

To avoid the requirement of 5 (1) that A works must have a prototype or a real model, some participant used the A works to apply for D works. To avoid above phenomenon, we give the following statements:

(1) D works must be subversive creative design or industrial design. In the process of formal examination, the work will be one-vote veto by the secretariat when it does not belong to this connotation.

(2) All recommended departments should strictly check the connotation of class D works. Once find out the works that belong to the connotation of class A are recommended to apply for class D, the eligibility for application of the next year class D works will be stopped.

3. Declaration for quantity

(1) The number of works submitted by universities (colleges and institutes) shall be no more than 20 for class A+D.

(2) The number of works submitted by higher vocational college shall be no more than 8 for class A+D.

4. Supervisor

Each supervisor is limited to 2 A and D works and responsible for the originality and authenticity of the works, and each work is limited to 1~3 supervisors.

5. Requirements for works

(1) The works should be the prototype, physical model, software, virtual concept and other achievements independently developed and designed by the student team. The papers and patents involved must be the results of the last two years (September 2022 to September 2024). Works must have a prototype or physical model; Category D: Concept video (MP4, 720P, 200M or less).

(2) The results that have been awarded by national competitions shall not be used for declaration.

(3) It is not allowed to apply directly with the achievements of the tutor.

(4) Do not plagiarize any achievement declaration that does not belong to me.

(5) The core content of the works shall not be the same or repeated with the previous nine works.

(6) It is forbidden to use intellectual property rights (such as patents, papers, etc.) without the signature of the participating students.

For violation of competition results, falsification of works, the competition commission after check will be on the official website or the relevant conference within the scope of present colleges during the event list, participating college, teachers and students, at the same time disqualified from winning works, outstanding teachers qualification and qualification of "challenge cup" of colleges and universities; If the situation is serious, relevant personnel will be held responsible according to the rules of the competition.

V. Registration

Table 1 Competition schedule

1. Competition registration

All colleges and universities shall fully publicize and launch the competition, and the participating units shall fill in the Competition Application Form (Annex 2). Please send all the attachments (Annex 2,PDF and Excel format ) to znnzds2025@163.com before March 1, 2025.

2. Work application

(1) Submitted time of Summary List of Works

For class A and D, please send the Summary List of Works (Annex 3) with official seal to znnzds2025@163.com in the format of PDF and Excel before March 15, 2025.

(2) Submission time of R&D (design) report and attachments

The application form for Class A ,R&D report and attachment (PDF format, within 5M), and the application form for Class D, design report and concept video (within 720P, 200M) should be send to znnzds2025@163.com before March 15, 2025.

(3) Special reminder

The key information of the works, such as the name of the works, the team members and the supervisors, should be subject to the summary list of the sealed version submitted by each university. In principle, it should not be modified later.

3. Final, Exhibition and Rewards (Expected in May, 2025)

With each participating college or university as a unit, please follow the final competition notification to send the electronic version of the work submission form to the organizer's email address. Additionally, please send the electronic version of the exhibition board design (in JPG format, the design size of the exhibition board is 0.9m ×1.2m, and the pixel is 72dpi) to the competition email address.

During the final competition, AD works will undergo on-site questioning and defense, and participating teams must bring their self-developed prototypes, physical models, and concept videos to the venue for display.

For AD works that are particularly large in size or weight and difficult to carry or transport, participants may apply to present via live video connection after obtaining approval from the competition organizing committee. Pre-recorded videos are not allowed for presentation. Failure to present on-site or via live video connection will result in the inability to win first, second, or special prizes.

VI. Award Types

1. Student awards

There are top prizes (may be declared vacant), first prizes, second prizes and excellence prizes. During the competition, the judges will determine the number of prizes based on the entire number and quality of the works.

2. University "Cup" award

The competition will award a certain number of "Cup" awards to the participating universities. It will be according to the total score of the winning works, from high to low score. The special prize, first prize, second prize and excellence prize are calculated according to 100 points, 70 points, 40 points and 10 points, respectively.

3. Outstanding supervisor award

The competition will award the “Outstanding Supervisor Award” to the supervisors of the top prize works.

VII. Other Matters

1. Please visit the following websites to keep updated:

· The official website of the competition (http://uiaec.ujs.edu.cn/).

· Official website of the Qingdao Agricultural University (https://www.qau.edu.cn).

2. Contact information:

· Li Laoshi, Qingdao Agricultural University; Tel: 086-0532-58957291;

· Huang Laoshi, Qingdao Agricultural University; Tel: 086-18610292992;

· Hou Laoshi, Jiangsu University; Tel: 2011@ujs.edu.cn;

3. Contact information:

· Form review competition exchange: competition student exchange QQ group number: 478055828 and 651011638;